Training from the seat with us...

LEARN TO:

Dig/grade/Doze to 3D lines

• Use the machine to dig or grade or doze to any 3D design line.
  

Excavate sewer/stormwater lines on grade

Prepare pavement for kerb on flat or graded base.

Cut out Footpath heights during Earthworks.

Dig/Grade/Doze to surfaces

Dig / Grade / Doze roads to any level relative to finished height.

eg Subgrade height, sub-base rock layers, finished layers, topsoil heights.

Use surface to excavate to certain depth to ensure cover requirements (and clearances to other assets) are met.  

(Eg Minimum cover for watermain may be 600mm below finished level.  Under the 100mm there is a requirement for 100mm sand.  Easily set dig height to finished level -800mm (or 850mm to allow a little bit of extra).

From the cab learn to:

Create your own 3D line to dig/grade to

Create your own surface to bulk-dig to eg V-drain in a paddock draining between 2 points or at specific grade.

Create your own surface on site - sloping (1 or 2 directions), flat or from multiple points. 

Watch as we show you how to set-out all construction items from the screen on site.

LEARN TO:

Transfering Files into controller

Ensuring equipment is setup correctly

Localise the job.

Setout:

Earthworks

Sewer

Stormwater

Title

Stakeout lines

Setout utilities (lines and pit heights)

Set out footpath (location and height)

Setting out for kerb

Setout points

Record points.

Save from Controller back to PC.